Extreme Networks X770-32q-FB-AC PSU Switch
Highlights
Introduction
The Summit X770 series switches are high-density, purpose-built top-of-rack
switches designed to support emerging 10 Gigabit Ethernet and 40 Gigabit
Ethernet- enabled servers in enterprise and cloud data centers.
Summit X770 helps optimize new server deployments with its 40 GbE ports –
each can be used natively as uplinks to BlackDiamond X8 chassis or other
Summit X770 acting as spines – and each 40GbE port can connect directly
to servers using 40GbE speeds or by breaking down into 10GbE connections
acting as the leaf.
The Summit X770 can be used as a spine or a leaf in fat tree topologies for servers
with 10GbE and 40GbE ports.
Ports
• 32 x 40GBase-X QSFP+
• 1 RJ-45 Serial Port
• 1 RJ45 Ethernet Management Port
• 1 USB Port (rear)
• 2 Mini BNC Ports (rear) 1588 output
ExtremeSwitching™ X770 Series
High-Density, Purpose-Built Top-of-Rack Switches Designed
to Support Emerging 10GbE and 40GbE Enabled Servers in
Enterprise and Cloud Data Centers
Product Overview
The Summit X770 provides high density for 40 Gigabit Ethernet and 10
Gigabit Ethernet switching in a small 1RU form factor.
With its versatile design, the Summit X770 series provides high density
Layer 2/3 switching with low latency cut-through switching, and IPv4
and IPv6 unicast and multicast routing to enable enterprise aggregation
and core backbone deployment in AC-powered and DC-powered
environments.
Summit X770 series simplifies network operation with the ExtremeXOS
modular operating system (OS), which is used among all Extreme
Networks Summit and BlackDiamond Ethernet switches. The high
availability ExtremeXOS operating system provides simplicity and ease of
operation through the use of one OS everywhere in the network.
40 Gigabit Ethernet and 10 Gigabit Ethernet Ports
The Summit X770 model provides 32 x 40 GbE QSFP+ ports which can
accept QSFP+ passive and active cables, as well as QSFP+ transceivers.
40 GbE ports can be configured as a 40 GbE port or as four 10 GbE
ports. The 10 GbE port mode can be supported by a 40GBASE-SR4
QSFP+ transceiver and fan-out optical cables, and is compatible with the
10GBASE-SR optical interface for distances up to 100 meters. 24 of the
32 QSFP+ ports can be broken into 4 ports of 10GbE. The remaining 8
ports of QSFP+ can also be converted into a single port of 10GbE giving a
maximum of 104 ports of 10GbE connections in a 1 RU device. The Summit
X770 is capable of Layer 2 and Layer 3 forwarding at up to 1.4 billion
packets per second forwarding rate.